Products

1. Crude oil

1.1. Low sulfur light oil

Basic technical parameters

Indicator name

Norm

Density at 20° С, g/cm3, not more than

0.820

Sulfur content, %, not more than

0.6

Paraffin content, %, not more than

6.0

Water content, %, not more than

0.50

Contaminant content, %, not more than

0.05

Run-down in volume %

- up to 200° С, at least

- up to 300° С, at least

- up to 350° С, at least

 

30

52

62

 

1.2. Sweet oil

Basic technical parameters

Indicator name

Norm

Density at 20° С, g/cm3, not more than

0.850

Sulfur content, %, not more than

0.6

Paraffin content, %, not more than

6.0

Water content, %, not more than

0.50

Contaminant content, %, not more than

0.05

Run-down in volume %

- up to 200° С, at least

- up to 300° С, at least

- up to 350° С, at least

 

21

42

53

 

2. Liquefied gas

2.1. Liquefied Hydrocarbon Fuel Gases

Material Safety Data Sheet (MSDS)

Certificate of quality

Description

Standard value for grade:

 PA

PBA

SPBT

MON, not less

89

-

Mass fractions of components, %:

 

- combined methane, ethane and ethylene

not regulated

- combined propane and propylene. not less

 -

-

not regulated

incl. propane

85±10

50±10

-

- combined butane and butylene:

not regulated

 

-

- maximum

-

-

60

- minimum

-

-

-

- combined unsaturated hydrocarbons, max.

6

6

-

Liquid residue by volume at 20°С, max.

0.7

1.6

1.6

Saturated vapor excess pressure, MPa:

 

at + 45 °С, max.

1.6

at - 20 °С, min.

 -

0.07

-

at - 30 °С, min.

 0.07

-

-

Mass fraction of mercaptane sulfur, % max.

 0.01

0.01

0.013

including hydrogen sulfide, max.

0.003

Free water and alkali content

none

Odor intensity index, not less

3

Solubility in water

not soluble

Remarks:

1. Octane number shall be regulated in case when specific grade is used as automotive fuel. 

2. When using liquefied gases of grades PT and SPBT as automotive fuel, the MON shall be not less than 89.0, while mass fraction of unsaturated hydrocarbons shall be less than 6% and saturated vapor pressure shall exceed 0.07 MPa for grades PT and SPBT at temperatures -30°C and -20°C, respectively. 

3. At temperatures -20°C and -30°C, saturated vapor pressure of liquefied gases shall be measured only in winter time. 

4. It is allowed not to measure odor intensity, when mass fraction of mercaptane sulfur in liquefied gases of PT, SPBT and BT grades is 0.002% or more, and PA and PBA grades is 0.001% or more. When mass fraction of mercaptane sulfur is below the above limits, and odor intensity is less than 3 points, the liquefied gases must be odorized according to established procedure.

   

2.3. Isobutane fraction

Material Safety Data Sheet (MSDS)

Certificate of quality

 

Indicator name

Standart value

 Grade A

Grade B

Grade C 

1 Mass fractions of components, %:

sum of hydrocarbons С12

 

 

not regulated

 

 

not regulated

 

 

not regulated

 

propane, not more than

isobutane, not less than

sum of butylenes, not more than

normal butane, not less than

sum ot hydrocarbones С5 and higher, not more than

 1,5

97,0 

0,5

2,0

 

 absent

4,5

90,0 

0,5

6,0

 

 0,5

 8,0

70,0 

not regulated

not regulated

 

 1,0

2 Mass fraction of hydrogen sulfide and mercaptane sulfur, %, not more than

 0,005 

0,005 

0,01

3 Free water and alkali content

 Abcence

Abcence

Abcence

 

4 Corrosive effect on copper

 1 category

1 category

1 category

 

1)on customer demand

 Note:

* - actual content of propane is not less than 90%.

 

2.4. Normal butane fraction

Material Safety Data Sheet (MSDS)

Certificate of quality

Indicator name

Standart value

Grade А

1 Mass fractions of components, %:

propane, not more than

isobutane, not more than

sum of butylenes, not more than

normal butane, not less than

sum of iso- and normal pentane

and higher, not more than

 

0,5

1,5

1,0

97,5

 

0,6

2 Mass fraction of hydrogen sulfide and mercaptane sulfur, %, not more than 

 0,005

3 Free water and alkali content

 Absence

4 Corrosive effect on copper1)

1 category

 1)on customer demant

 

2.5. Isopentane fraction

Material Safety Data Sheet (MSDS)

Certificate of quality

Indicator name

Standart value 

 Grade A

Grade B

Grade C

1 Mass fractions of components, %:

sum of hydrocarbons С24, not more than

isopentane, not less than

normal pentane, not more than

sum of hydrocarbons С6 and higher,

not more than

combined unsaturated hydrocarbons, max.

not more than

 

1,5

97,5

2,5

 

0,3

 

0,5

 

1,5

97,5

2,5

 

0,3

 

0,5

 

1,5

97,5

2,5

 

0,3

 

0,5

2 Mass fraction of sulfur, % max.

 0,003

0,01

0,015 

3 Alkali content 

Absence

Absence

Absence

4 Freee water and contamination content

Absence 

Absence

Absence 

 

2.6. Normal pentane fraction

Material Safety Data Sheet (MSDS)

Certificate of quality

Indicator name

Standart value

Grade A

1 Mass fractions of components, %:

sum of hydrocarbons С1-C3

sum of hydrocarbons С4, not more than

normal pentane, not less than

isopentane

sum of cyclopentane and hуdrocarbons С6 and higher, not more than

inclusive hydrocarbons С6 and higher, not more than

combined unsaturated hydrocarbons, not more than

 

not regulated 

0,2

96,5

not regulated

 

4,5

 

2,0

0,5

2 Mass fraction of sulfur compounds, %, not more than

 0,01

3 Alkali content  

Absence 

4 Free water and contamination content

Absence

 

3. Stable gasoline

Material Safety Data Sheet (MSDS)

Certificate of quality


Basic technical parameters

Standard value:

Grade A

Grade B

Grade C

1 Fractional composition:

beginning of boiling, °С, not low than

end of boiling, °С, not higher than

volume fraction of the residue in the flask,

%, not more than

volume fraction of the residue and losses,

%, no more than

 

25

185

 

1,5

 

5

 

25

185

 

1,5

 

5

 

 

32

185

 

1,5

 

5

2  Mass fractions of components, %:

 sum of hydrocarbons С3С4,

 not more than

 sum of hydrocarbons С5 and higher,

not less than

 

 

 

4

 

96

 

 

4

 

96

 

 

 

not regulated

not regulated

3 The actual content of pitches,

mg/100 ml of benzine, not more than

 

5,0

4 Saturated vapor pressure,

MPa, not more than

 

0,12

5 Mass fraction of sulfur,

%, not more than

 

0,04 

6 Test on a copper plate

sustained

not regulated

not regulated

7 Water and contamination content

absence

8 Color

colorless, transparent

9 Density at 20 0С, kg/m3

not less than 610

 

For complete information in Russian and English languages about products and terms of delivery, please, contact our experts of the department of export-import of crude oil, oil products and gas processing products:

tel.: + 375 232 79-34-94 (Russian/English); 
fax: + 375 232 79-31-36
Spartak Bosak

Crude oil:
tel.: + 375 232 79-35-54 (Russian/English)
Vadim Karpenko

 

Stripped gas:
tel.: + 375 232 79-33-47 (Russian/English)
Ilya Olievski